Water flows attractively over all four sides of this distinctive water feature. This means it can be positioned anywhere in the garden. The water streams gently over the edges into the collection tank, creating the effect of a soothing waterfall.
Our aluminium water block is a distinctive and stylish garden ornament. Water bubbles up through the stainless steel nozzle, which is enhanced with LED lights. The water then flows smoothly down the sides of the block into the underground collection tank before being pumped back to the top. The LED lighting provides extra ambience at night.
Aluminium is corrosion resistant: the water block can withstand freezing temperatures and other weather conditions without damage. You will be able to enjoy this product for many years. The aluminium water block is available in several colours.
Once constructed, the aluminium water block is given several finishing treatments. The material is roughened to allow better adhesion of the powder coating. This powder coating is available in a variety of colours and is applied with a strong adhesive primer. Finally, the aluminium is finished with a hard topcoat. This ensures that our water blocks are scratch resistant.
SPECIFICATIONS:
- 5-year guarantee (pumps 2-year guarantee, LED lights 1-year guarantee).
- Includes LED lighting, pump and fountain.
- Aluminium water blocks are very robust, hard-wearing, resistant to corrosion and durable.
- The aluminium has a thickness of 4 mm.
- Scratch-resistant topcoat.
- Standard RAL colours are RAL 7016, RAL 7021, RAL 9005 and RAL 9016. There is a start-up charge for other colours.
- We also supply professional maintenance products.
- Products should be unpacked immediately upon receipt to release any moisture trapped inside the packaging. If the product is left in its packaging, it may develop patches of uneven discolouration.
- Our water features should be installed on a firm, level surface.
- The guarantee expires if you drill or grind in a way that is not specified.
- The water used in this product should have a neutral pH value (7) to protect the look and quality of the material.
- The pump may become clogged if green waste is allowed to build up inside the product. However, this water feature is simple to open and clean. After cleaning the nozzles, check the pump for blockages. Optionally, a filter can be placed between the pump and the fountain.
- Clean annually by hosing dirt from the product with clean tap water, followed by cleaning with detergent. Do not use a pressure washer and/or scouring pad for this purpose. This damages the coating.
- Limescale can be removed with ADEZZ Descaler BIO.
How to use by frost:
- Lower the water level to below the overflow pipe. This is about 10 cm. below the rim. Note! The pump must be submerged.
- Always remove the plug from the socket in case of frost.
- We recommend a frost-free container. This is available from garden centres or DIY stores.
